Successfully loaded and running ArcoPro, but the CPU Frequency is maxed out most of the time, and all 4 cores are running 80+% all the time, causing overheating. Is this only my experience? What can be done to resolve this?
Just a minor note: Conky disappears when I mouse click on the desktop???
[CLOSED] ArcoPro using Excessive Resources, causing overheating
-
TomInTheDungeon
- Crewman
- Posts: 73
- Joined: Thu Dec 13, 2018 2:39 pm
- Location: Paul, Idaho, USA
From "The Orville": Humans - The hillbillies of the universe!
Just be advised you have provided very little information and makes it extremely difficult to provide any valid guidance.
Which DE, which kernel are you using .. what are your system specs ..
Type top in the terminal and see which processes are running to understand which ones are taking up the CPU resources.
Type probe in the terminal and provide the link.
Which DE, which kernel are you using .. what are your system specs ..
Type top in the terminal and see which processes are running to understand which ones are taking up the CPU resources.
Type probe in the terminal and provide the link.
Arch Wiki: https://wiki.archlinux.org
Arch Forums: https://bbs.archlinux.org
Active kernel releases: https://www.kernel.org/category/releases.html
Arch Forums: https://bbs.archlinux.org
Active kernel releases: https://www.kernel.org/category/releases.html
-
TomInTheDungeon
- Crewman
- Posts: 73
- Joined: Thu Dec 13, 2018 2:39 pm
- Location: Paul, Idaho, USA
6.10.10-hardened1-1 or zen, either has the same result.
LXQT desktop
Probe URL: https://linux-hardware.org/?probe=86b5dfa46a
Top shows less than 2% memory use for each process running.
After doing updates this morning, all has calmed down...returned to normal. System has been running for 52 minutes with highest temp at 113 degrees F.
CPU usage less than 15% on all 4 cores.
If you see something in Probe, please advise. It all looks good to me. Mark as closed, otherwise. Thanks.
LXQT desktop
Probe URL: https://linux-hardware.org/?probe=86b5dfa46a
Top shows less than 2% memory use for each process running.
After doing updates this morning, all has calmed down...returned to normal. System has been running for 52 minutes with highest temp at 113 degrees F.
CPU usage less than 15% on all 4 cores.
If you see something in Probe, please advise. It all looks good to me. Mark as closed, otherwise. Thanks.
From "The Orville": Humans - The hillbillies of the universe!