I'm descending Manjaro

"Off-topic" but Linux related discussion, about ArcoLinux or other distributions.
Post Reply
Katakuri2004
recruit crewman
Posts: 1
Joined: Sun Aug 14, 2022 9:43 am

Arch Linux, Manjaro, and Acro Linux I've learned something from each axylos. that you can install any software you want and have it operate smoothly and faultlessly using dotfiles and altering archtitus. Additionally, your days of ricing will continue as long as you have the repositories and wget/curl.
User avatar
erikdubois
Captain
Posts: 5353
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:

Welcome

Enjoy the learning
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.
sunisup
Crewman
Posts: 36
Joined: Mon Nov 28, 2022 5:13 pm

I had an issue with the tray icon for updates not showing update.
I listed my system info and the support team at Manjaro said they wouldn't support me because I have a Frankenstein system.
Can I get support here ? My system info is listed below:

Code: Select all

[demo@manjaro ~]$ inxi -Fazr
System:
  Kernel: 6.0.13-1-MANJARO arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
    parameters: BOOT_IMAGE=/boot/vmlinuz-6.0-x86_64
    root=UUID=45ca132d-4a37-4dc3-afa0-be2e80d6a4a2 rw quiet pci=nocrs
    acpi=force "acpi_osi=Windows 2022" ibt=off mem_sleep_default=s2idle
  Desktop: KDE Plasma v: 5.26.4 tk: Qt v: 5.15.7 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Manjaro Linux base: Arch Linux
Machine:
  Type: Convertible System: HP product: HP Spectre x360 Convertible 15-df1xxx
    v: N/A serial: <superuser required> Chassis: type: 31
    serial: <superuser required>
  Mobo: HP model: 863F v: 54.24 serial: <superuser required> UEFI: AMI
    v: F.28 date: 07/14/2022
Battery:
  ID-1: BAT0 charge: 69.3 Wh (100.0%) condition: 69.3/69.3 Wh (100.0%)
    volts: 13.0 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
    status: full cycles: 184
  Device-1: hid-0018:04F3:2992.0001-battery model: ELAN2514:00 04F3:2992
    serial: N/A charge: N/A status: discharging
CPU:
  Info: model: Intel Core i7-10510U bits: 64 type: MT MCP
    arch: Comet/Whiskey Lake note: check gen: core 10 level: v3 note: check
    built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xF4
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 8 MiB desc: 1x8 MiB
  Speed (MHz): avg: 1175 high: 2300 min/max: 400/4900 scaling:
    driver: intel_pstate governor: powersave cores: 1: 800 2: 800 3: 800 4: 800
    5: 2300 6: 800 7: 800 8: 2300 bogomips: 36812
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities:
  Type: itlb_multihit status: KVM: Split huge pages
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
  Type: retbleed mitigation: Enhanced IBRS
  Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
    prctl
  Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
    sanitization
  Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB
    filling, PBRSB-eIBRS: SW sequence
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: Intel CometLake-U GT2 [UHD Graphics] vendor: Hewlett-Packard
    driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
    ports: active: eDP-1 empty: DP-1,DP-2 bus-ID: 00:02.0 chip-ID: 8086:9b41
    class-ID: 0300
  Device-2: NVIDIA GP108M [GeForce MX250] vendor: Hewlett-Packard
    driver: nvidia v: 525.60.11 alternate: nouveau,nvidia_drm non-free: 525.xx+
    status: current (as of 2022-12) arch: Pascal code: GP10x
    process: TSMC 16nm built: 2016-21 pcie: gen: 3 speed: 8 GT/s lanes: 4
    bus-ID: 3b:00.0 chip-ID: 10de:1d13 class-ID: 0302
  Device-3: Chicony HP Wide Vision FHD Camera type: USB driver: uvcvideo
    bus-ID: 1-5:2 chip-ID: 04f2:b67b class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.5 compositor: kwin_x11 driver: X:
    loaded: modesetting,nvidia dri: iris gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 3840x2160 s-dpi: 96 s-size: 1016x571mm (40.00x22.48")
    s-diag: 1165mm (45.88")
  Monitor-1: eDP-1 mapped: eDP-1-1 model: AU Optronics 0x30eb built: 2017
    res: 3840x2160 hz: 60 dpi: 284 gamma: 1.2 size: 344x193mm (13.54x7.6")
    diag: 394mm (15.5") ratio: 16:9 modes: 3840x2160
  API: OpenGL v: 4.6.0 NVIDIA 525.60.11 renderer: NVIDIA GeForce
    MX250/PCIe/SSE2 direct render: Yes
Audio:
  Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
    driver: sof-audio-pci-intel-cnl
    alternate: snd_hda_intel,snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:02c8 class-ID: 0401
  Sound API: ALSA v: k6.0.13-1-MANJARO running: yes
  Sound Server-1: JACK v: 1.9.21 running: no
  Sound Server-2: PulseAudio v: 16.1 running: no
  Sound Server-3: PipeWire v: 0.3.63 running: yes
Network:
  Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
    bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
  IF: wlp0s20f3 state: up mac: <filter>
Drives:
  Local Storage: total: 931.51 GiB used: 312.81 GiB (33.6%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 41.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 239 GiB size: 234.94 GiB (98.30%) used: 51.16 GiB (21.8%)
    fs: ext4 dev: /dev/nvme0n1p8 maj-min: 259:8
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 68.9 MiB (71.8%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-3: /home raw-size: 415.57 GiB size: 407.98 GiB (98.17%)
    used: 261.58 GiB (64.1%) fs: ext4 dev: /dev/nvme0n1p7 maj-min: 259:7
Swap:
  Alert: No swap data was found.
Sensors:
  System Temperatures: cpu: 52.0 C pch: 49.0 C mobo: N/A gpu: nvidia
    temp: 52 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: 1908 pm: pacman pkgs: 1902 libs: 433 tools: pamac,paru,pikaur,yay
    pm: flatpak pkgs: 6 pm: snap pkgs: 0
  Active pacman repo servers in: /etc/pacman.d/arcolinux-mirrorlist
    1: https://gitlab.com/arcolinux/$repo/-/raw/main/$arch
    2: https://mirror.accum.se/mirror/arcolinux.info/$repo/$arch
    3: https://ftp.belnet.be/arcolinux/$repo/$arch
    4: https://mirror.aarnet.edu.au/pub/arcolinux/$repo/$arch
    5: https://mirror.funami.tech/arcolinux/$repo/$arch
    6: https://mirror.jingk.ai/arcolinux/$repo/$arch
    7: https://arcolinux.github.io/$repo/$arch
  Active pacman repo servers in: /etc/pacman.d/chaotic-mirrorlist
    1: https://geo-mirror.chaotic.cx/$repo/$arch
    2: https://cdn-mirror.chaotic.cx/$repo/$arch
    3: https://cdn-cn-mirror.chaotic.cx/$repo/$arch
    4: https://au-mirror.chaotic.cx/$repo/$arch
    5: https://au-2-mirror.chaotic.cx/$repo/$arch
    6: https://br-mirror.chaotic.cx/$repo/$arch
    7: https://br-2-mirror.chaotic.cx/$repo/$arch
    8: https://br-3-mirror.chaotic.cx/$repo/$arch
    9: https://bg-mirror.chaotic.cx/$repo/$arch
    10: https://ca-mirror.chaotic.cx/$repo/$arch
    11: https://ca-2-mirror.chaotic.cx/$repo/$arch
    12: https://ca-3-mirror.chaotic.cx/$repo/$arch
    13: https://cl-1-mirror.chaotic.cx/$repo/$arch
    14: https://cl-2-mirror.chaotic.cx/$repo/$arch
    15: https://fr-1-mirror.chaotic.cx/$repo/$arch
    16: https://fr-2-mirror.chaotic.cx/$repo/$arch
    17: https://fr-3-mirror.chaotic.cx/$repo/$arch
    18: https://de-mirror.chaotic.cx/$repo/$arch
    19: https://de-2-mirror.chaotic.cx/$repo/$arch
    20: https://de-3-mirror.chaotic.cx/$repo/$arch
    21: https://de-4-mirror.chaotic.cx/$repo/$arch
    22: https://de-5-mirror.chaotic.cx/$repo/$arch
    23: https://de-6-mirror.chaotic.cx/$repo/$arch
    24: https://in-mirror.chaotic.cx/$repo/$arch
    25: https://in-2-mirror.chaotic.cx/$repo/$arch
    26: https://in-3-mirror.chaotic.cx/$repo/$arch
    27: https://in-4-mirror.chaotic.cx/$repo/$arch
    28: https://in-5-mirror.chaotic.cx/$repo/$arch
    29: https://in-6-mirror.chaotic.cx/$repo/$arch
    30: https://jp-mirror.chaotic.cx/$repo/$arch
    31: https://jp-1-mirror.chaotic.cx/$repo/$arch
    32: https://jp-2-mirror.chaotic.cx/$repo/$arch
    33: https://jp-3-mirror.chaotic.cx/$repo/$arch
    34: https://kr-mirror.chaotic.cx/$repo/$arch
    35: https://kr-2-mirror.chaotic.cx/$repo/$arch
    36: https://kr-3-mirror.chaotic.cx/$repo/$arch
    37: https://es-mirror.chaotic.cx/$repo/$arch
    38: https://es-2-mirror.chaotic.cx/$repo/$arch
    39: https://ae-mirror.chaotic.cx/$repo/$arch
    40: https://ae-2-mirror.chaotic.cx/$repo/$arch
    41: https://uk-mirror.chaotic.cx/$repo/$arch
    42: https://uk-1-mirror.chaotic.cx/$repo/$arch
    43: https://uk-2-mirror.chaotic.cx/$repo/$arch
    44: https://uk-3-mirror.chaotic.cx/$repo/$arch
    45: https://us-az-mirror.chaotic.cx/$repo/$arch
    46: https://us-az-1-mirror.chaotic.cx/$repo/$arch
    47: https://us-az-2-mirror.chaotic.cx/$repo/$arch
    48: https://us-fl-mirror.chaotic.cx/$repo/$arch
    49: https://us-mi-mirror.chaotic.cx/$repo/$arch
    50: https://us-ny-mirror.chaotic.cx/$repo/$arch
    51: https://us-tx-mirror.chaotic.cx/$repo/$arch
    52: https://us-ut-mirror.chaotic.cx/$repo/$arch
    53: https://us-va-mirror.chaotic.cx/$repo/$arch
    54: https://us-va-2-mirror.chaotic.cx/$repo/$arch
    55: https://us-va-3-mirror.chaotic.cx/$repo/$arch
    56: https://us-va-4-mirror.chaotic.cx/$repo/$arch
  Active pacman repo servers in: /etc/pacman.d/mirrorlist
    1: https://mirrors.fossho.st/manjaro/unstable/$repo/$arch
    2: https://mirrors.manjaro.org/repo/unstable/$repo/$arch
Info:
  Processes: 275 Uptime: 1d 2h 39m wakeups: 33163 Memory: 15.26 GiB
  used: 10.29 GiB (67.4%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.0 clang: 14.0.6 Shell: Bash v: 5.1.16
  running-in: alacritty inxi: 3.3.24
User avatar
erikdubois
Captain
Posts: 5353
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:

Sorry
Install ArcoLinux for support
You will love it
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.
Post Reply

Return to “ArcoLinux and General Linux Discussion”