ArcoLinux -D -B 6.9.2 are online

[OPEN] ArcolinuxD Openbox won't boot after restart

Post Reply
loop93
recruit crewman
Posts: 2
Joined: Sat Mar 24, 2018 11:40 am
Croatia
[OPEN] ArcolinuxD Openbox won't boot after restart

Post by loop93 » Thu Jul 05, 2018 1:32 pm

Hi, arcolinuxD WM open box won't boot after restart, Thanks!!!

13.789742] usbcore: registered new interface driver uvcvideo
[ 13.789744] USB Video Class driver (1.1.1)
[ 14.052224] i2c i2c-1: SMBus Timeout!
[ 14.052253] i2c i2c-1: Failed reset at end of transaction (01)
[ 14.052303] i2c i2c-1: Failed! (01)
[ 14.052340] i2c i2c-1: Failed! (01)
[ 14.052375] i2c i2c-1: Failed! (01)
[ 14.052409] i2c i2c-1: Failed! (01)
[ 14.052444] i2c i2c-1: Failed! (01)
[ 14.052478] i2c i2c-1: Failed! (01)
[ 14.052513] i2c i2c-1: Failed! (01)
[ 14.052547] i2c i2c-1: Failed! (01)
[ 14.052581] i2c i2c-1: Failed! (01)
[ 14.052616] i2c i2c-1: Failed! (01)
[ 14.052650] i2c i2c-1: Failed! (01)
[ 14.052685] i2c i2c-1: Failed! (01)
[ 14.052719] i2c i2c-1: Failed! (01)
[ 14.052758] i2c i2c-2: Failed! (01)
[ 14.052792] i2c i2c-2: Failed! (01)
[ 14.052827] i2c i2c-2: Failed! (01)
[ 14.052861] i2c i2c-2: Failed! (01)
[ 14.052896] i2c i2c-2: Failed! (01)
[ 14.052930] i2c i2c-2: Failed! (01)
[ 14.052964] i2c i2c-2: Failed! (01)
[ 14.053002] i2c i2c-2: Failed! (01)
[ 14.053037] i2c i2c-2: Failed! (01)
[ 14.053073] i2c i2c-2: Failed! (01)
[ 14.053108] i2c i2c-2: Failed! (01)
[ 14.053144] i2c i2c-2: Failed! (01)
[ 14.053179] i2c i2c-2: Failed! (01)
[ 14.053214] i2c i2c-2: Failed! (01)
[ 14.053252] i2c i2c-3: Failed! (01)
[ 14.053287] i2c i2c-3: Failed! (01)
[ 14.053323] i2c i2c-3: Failed! (01)
[ 14.053392] i2c i2c-3: Failed! (01)
[ 14.053429] i2c i2c-3: Failed! (01)
[ 14.053465] i2c i2c-3: Failed! (01)
[ 14.053500] i2c i2c-3: Failed! (01)
[ 14.053536] i2c i2c-3: Failed! (01)
[ 14.053571] i2c i2c-3: Failed! (01)
[ 14.053607] i2c i2c-3: Failed! (01)
[ 14.053642] i2c i2c-3: Failed! (01)
[ 14.053678] i2c i2c-3: Failed! (01)
[ 14.053713] i2c i2c-3: Failed! (01)
[ 14.053749] i2c i2c-3: Failed! (01)
[ 14.070326] lm90 7-004c: 7-004c supply vcc not found, using dummy regulator
[ 14.081865] lm90 7-004c: 7-004c supply vcc not found, using dummy regulator
[ 14.173299] i2c i2c-0: Failed! (01)
[ 14.173357] i2c i2c-0: Failed! (01)
[ 14.173390] i2c i2c-0: Failed! (01)
[ 14.173418] i2c i2c-0: Failed! (01)
[ 14.173445] i2c i2c-0: Failed! (01)
[ 14.173472] i2c i2c-0: Failed! (01)
[ 14.173499] i2c i2c-0: Failed! (01)
[ 14.173526] i2c i2c-0: Failed! (01)
[ 14.173553] i2c i2c-0: Failed! (01)
[ 14.173583] i2c i2c-1: Failed! (01)
[ 14.173613] i2c i2c-1: Failed! (01)
[ 14.173642] i2c i2c-1: Failed! (01)
[ 14.173671] i2c i2c-1: Failed! (01)
[ 14.173700] i2c i2c-1: Failed! (01)
[ 14.173729] i2c i2c-1: Failed! (01)
[ 14.173758] i2c i2c-1: Failed! (01)
[ 14.173787] i2c i2c-1: Failed! (01)
[ 14.173816] i2c i2c-1: Failed! (01)
[ 14.173846] i2c i2c-2: Failed! (01)
[ 14.173875] i2c i2c-2: Failed! (01)
[ 14.173904] i2c i2c-2: Failed! (01)
[ 14.173933] i2c i2c-2: Failed! (01)
[ 14.173962] i2c i2c-2: Failed! (01)
[ 14.173991] i2c i2c-2: Failed! (01)
[ 14.174020] i2c i2c-2: Failed! (01)
[ 14.174049] i2c i2c-2: Failed! (01)
[ 14.174078] i2c i2c-2: Failed! (01)
[ 14.174108] i2c i2c-3: Failed! (01)
[ 14.174137] i2c i2c-3: Failed! (01)
[ 14.174166] i2c i2c-3: Failed! (01)
[ 14.174195] i2c i2c-3: Failed! (01)
[ 14.174224] i2c i2c-3: Failed! (01)
[ 14.174253] i2c i2c-3: Failed! (01)
[ 14.174282] i2c i2c-3: Failed! (01)
[ 14.174311] i2c i2c-3: Failed! (01)
[ 14.174340] i2c i2c-3: Failed! (01)
[ 14.216526] [TTM] Zone kernel: Available graphics memory: 8213568 kiB
[ 14.216528] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 14.216529] [TTM] Initializing pool allocator
[ 14.216534] [TTM] Initializing DMA pool allocator
[ 14.216547] nouveau 0000:06:00.0: DRM: VRAM: 1024 MiB
[ 14.216549] nouveau 0000:06:00.0: DRM: GART: 1048576 MiB
[ 14.216553] nouveau 0000:06:00.0: DRM: TMDS table version 2.0
[ 14.216555] nouveau 0000:06:00.0: DRM: DCB version 4.0
[ 14.216557] nouveau 0000:06:00.0: DRM: DCB outp 00: 02000300 00000000
[ 14.216559] nouveau 0000:06:00.0: DRM: DCB outp 01: 01000302 00020030
[ 14.216561] nouveau 0000:06:00.0: DRM: DCB outp 02: 04011380 00000000
[ 14.216563] nouveau 0000:06:00.0: DRM: DCB outp 03: 08011382 00020030
[ 14.216564] nouveau 0000:06:00.0: DRM: DCB outp 04: 02022362 00020010
[ 14.216566] nouveau 0000:06:00.0: DRM: DCB conn 00: 00001030
[ 14.216568] nouveau 0000:06:00.0: DRM: DCB conn 01: 00010130
[ 14.216569] nouveau 0000:06:00.0: DRM: DCB conn 02: 00002261
[ 14.217392] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 14.217393] [drm] Driver supports precise vblank timestamp query.
[ 14.218268] nouveau 0000:06:00.0: DRM: MM: using COPY1 for buffer copies
[ 14.380324] nouveau 0000:06:00.0: DRM: allocated 1920x1080 fb: 0x60000, bo 00000000f5f6d2be
[ 14.390022] fbcon: nouveaufb (fb0) is primary device
[ 14.524492] Console: switching to colour frame buffer device 240x67
[ 14.536106] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 14.555813] nouveau 0000:06:00.0: fb0: nouveaufb frame buffer device
[ 14.578434] [drm] Initialized nouveau 1.3.1 20120801 for 0000:06:00.0 on minor 0
[ 14.875646] microcode: CPU0: new patch_level=0x010000dc
[ 14.875664] microcode: CPU5: new patch_level=0x010000dc
[ 14.875685] microcode: CPU2: new patch_level=0x010000dc
[ 14.875706] microcode: CPU3: new patch_level=0x010000dc
[ 14.875726] microcode: CPU4: new patch_level=0x010000dc
[ 14.875747] microcode: CPU1: new patch_level=0x010000dc
[ 20.053811] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 20.329341] r8169 0000:03:00.0 enp3s0: link down
[ 20.329461] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 23.009594] r8169 0000:03:00.0 enp3s0: link up
[ 23.009612] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
[ 30.663270] fuse init (API version 7.26)
[ 56.337956] usb 1-2: reset high-speed USB device number 3 using ehci-pci

User avatar
erikdubois
Captain
Posts: 990
Joined: Tue Nov 07, 2017 2:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] ArcolinuxD WM open box x64 won't boot after restart

Post by erikdubois » Thu Jul 05, 2018 5:35 pm

Try to install it on your harddisk or ssd and see if the problem persists.
You can install it also on vmware.

I would like to rule out that this is a virtual box issue.

See latest video's about issues with virtualbox.

https://youtube.com/erikdubois

Help us to help you.

Give more info.

https://arcolinux.com/category/arcolinux/help/
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
and only then use the power of our moderators.


Post Reply

Return to “Openbox”