ArcoLinux -D -B 19.5 iso's have been released

[OPEN] Iso is not built and thus not copied

Post Reply
a-mere-peasant
recruit crewman
Posts: 1
Joined: Fri Sep 06, 2019 2:48 pm
India
[OPEN] Iso is not built and thus not copied

Post by a-mere-peasant » Fri Sep 06, 2019 2:53 pm

I tried to build the xfce-minimal iso and it gave me the error. cp: cannot stat '/home/x/arcolinuxb-build/archiso/out/arcolinuxb*': No such file or directory
I do know the error is somewhere before this but cannot figure out where , here is the code from my terminal

Code: Select all

[x@x-pc installation-scripts]$ ./30-build-the-iso-local-v3.sh

################################################################## 
Phase 1 : clean up and download the latest ArcoLinux-iso from github
################################################################## 

Deleting the work folder if one exists
Deleting the build folder if one exists - takes some time
[sudo] password for x: 
Git cloning files and folder to work folder
Cloning into '../work'...
remote: Enumerating objects: 111, done.
remote: Counting objects: 100% (111/111), done.
remote: Compressing objects: 100% (75/75), done.
remote: Total 2142 (delta 60), reused 69 (delta 31), pack-reused 2031
Receiving objects: 100% (2142/2142), 4.18 MiB | 3.13 MiB/s, done.
Resolving deltas: 100% (1374/1374), done.

################################################################## 
Phase 2 : Getting the latest versions for some important files
################################################################## 

Removing the old packages.x86_64 file from work folder
Copying the new packages.x86_64 file
Removing old files/folders from /etc/skel
getting .bashrc from arcolinux-root
--2019-09-06 18:09:13--  https://raw.githubusercontent.com/arcolinux/arcolinux-root/master/etc/skel/.bashrc-latest
Loaded CA certificate '/etc/ssl/certs/ca-certificates.crt'
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 199.232.20.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|199.232.20.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4661 (4.6K) [text/plain]
Saving to: ‘../work/archiso/airootfs/etc/skel/.bashrc’

../work/archiso/airoot 100%[==========================>]   4.55K  --.-KB/s    in 0s      

2019-09-06 18:09:13 (39.8 MB/s) - ‘../work/archiso/airootfs/etc/skel/.bashrc’ saved [4661/4661]


################################################################## 
Phase 3 : Renaming the ArcoLinux iso
################################################################## 

Renaming to iso_name=arcolinuxb-xfce-min
Renaming to iso_label="alb-xfce-min


################################################################## 
Phase 4 : Checking if archiso is installed
################################################################## 

################################################################
################## archiso is already installed
################################################################

################################################################## 
Phase 5 : Moving files to build folder
################################################################## 

Copying files and folder to build folder as root
Deleting the work folder if one exists - clean up

################################################################## 
Phase 6 : Cleaning the cache
################################################################## 

error: failed to init transaction (unable to lock database)
error: could not lock database: File exists
  if you're sure a package manager is not already
  running, you can remove /var/lib/pacman/db.lck

################################################################## 
Phase 7 : Building the iso
################################################################## 

###################################################################
0. start of the build script
###################################################################
###################################################################
1. Setup custom pacman.conf with current cache directories.
###################################################################
###################################################################
2. Base installation, plus needed packages (airootfs)
###################################################################

[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO:                   Command:   init
[mkarchiso] INFO:              Architecture:   x86_64
[mkarchiso] INFO:         Working directory:   work/x86_64
[mkarchiso] INFO:    Installation directory:   arch
[mkarchiso] INFO:        Pacman config file:   work/pacman.conf

[mkarchiso] INFO: Installing packages to 'work/x86_64/airootfs/'...
==> Creating install root at work/x86_64/airootfs
==> Installing packages to work/x86_64/airootfs
:: Synchronizing package databases...
 core                         132.4 KiB  1043K/s 00:00 [----------------------------] 100%
 extra                       1664.5 KiB  8.42M/s 00:00 [----------------------------] 100%
 community                      4.9 MiB  6.75M/s 00:01 [----------------------------] 100%
 multilib                     169.6 KiB  12.7M/s 00:00 [----------------------------] 100%
 arcolinux_repo                32.6 KiB  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo.sig           310.0   B  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo_3party          8.0 KiB  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo_3party.sig    310.0   B  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo_submicron       9.9 KiB  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo_submicro...   309.0   B  0.00B/s 00:00 [----------------------------] 100%
 arcolinux_repo_iso            49.8 KiB   339K/s 00:00 [----------------------------] 100%
 arcolinux_repo_iso.sig       310.0   B  0.00B/s 00:00 [----------------------------] 100%
:: There are 50 members in group base:
:: Repository core
   1) bash  2) bzip2  3) coreutils  4) cryptsetup  5) device-mapper  6) dhcpcd
   7) diffutils  8) e2fsprogs  9) file  10) filesystem  11) findutils  12) gawk
   13) gcc-libs  14) gettext  15) glibc  16) grep  17) gzip  18) inetutils  19) iproute2
   20) iputils  21) jfsutils  22) less  23) licenses  24) linux  25) linux-firmware
   26) logrotate  27) lvm2  28) man-db  29) man-pages  30) mdadm  31) nano  32) netctl
   33) pacman  34) pciutils  35) perl  36) procps-ng  37) psmisc  38) reiserfsprogs
   39) s-nail  40) sed  41) shadow  42) sysfsutils  43) systemd-sysvcompat  44) tar
   45) texinfo  46) usbutils  47) util-linux  48) vi  49) which  50) xfsprogs

Enter a selection (default=all): 
resolving dependencies...
:: There are 2 providers available for resolvconf:
:: Repository core
   1) openresolv  2) systemd-resolvconf

Enter a number (default=1): 
looking for conflicting packages...

Package (139)                 New Version                Net Change

core/acl                      2.2.53-1                     0.30 MiB
core/archlinux-keyring        20190827-1                   0.93 MiB
core/argon2                   20190702-1                   0.11 MiB
core/attr                     2.4.48-1                     0.19 MiB
core/audit                    2.8.5-3                      0.96 MiB
core/ca-certificates          20181109-1                   0.00 MiB
core/ca-certificates-mozilla  3.46-1                       0.90 MiB
core/ca-certificates-utils    20181109-1                   0.01 MiB
core/cracklib                 2.9.7-1                      0.90 MiB
core/curl                     7.65.3-1                     1.59 MiB
core/db                       5.3.28-4                     6.33 MiB
core/dbus                     1.12.16-2                    0.90 MiB
core/expat                    2.2.7-1                      0.28 MiB
core/gdbm                     1.18.1-2                     0.48 MiB
core/glib2                    2.60.7-1                    14.21 MiB
core/gmp                      6.1.2-2                      0.95 MiB
core/gnupg                    2.2.17-2                     9.77 MiB
core/gnutls                   3.6.9-1                      6.68 MiB
core/gpgme                    1.13.1-1                     1.23 MiB
core/groff                    1.22.4-1                     9.58 MiB
core/hwids                    20190818-1                   1.71 MiB
core/iana-etc                 20190823-1                   3.89 MiB
core/icu                      64.2-1                      36.47 MiB
core/iptables                 1:1.8.3-1                    2.41 MiB
core/json-c                   0.13.1-2                     0.15 MiB
core/kbd                      2.2.0-3                      2.87 MiB
core/keyutils                 1.6.1-1                      0.17 MiB
core/kmod                     26-2                         0.55 MiB
core/krb5                     1.17-1                       4.66 MiB
core/libaio                   0.3.112-1                    0.02 MiB
core/libarchive               3.4.0-2                      1.07 MiB
core/libassuan                2.5.3-1                      0.15 MiB
core/libcap                   2.27-1                       0.12 MiB
core/libcap-ng                0.7.9-1                      0.12 MiB
extra/libcroco                0.6.13-1                     1.18 MiB
core/libelf                   0.176-1                      2.29 MiB
core/libffi                   3.2.1-3                      0.11 MiB
core/libgcrypt                1.8.5-1                      1.36 MiB
core/libgpg-error             1.36-1                       1.10 MiB
core/libidn2                  2.2.0-1                      0.38 MiB
core/libksba                  1.3.5-1                      0.28 MiB
core/libldap                  2.4.48-1                     0.90 MiB
core/libmnl                   1.0.4-2                      0.06 MiB
extra/libnetfilter_conntrack  1.0.7-1                      0.16 MiB
extra/libnfnetlink            1.0.1-3                      0.04 MiB
core/libnftnl                 1.1.3-1                      0.22 MiB
core/libnghttp2               1.39.2-1                     0.34 MiB
core/libnl                    3.4.0-1                      1.65 MiB
core/libpcap                  1.9.0-1                      0.51 MiB
core/libpipeline              1.5.1-1                      0.12 MiB
core/libpsl                   0.21.0-1                     0.25 MiB
core/libsasl                  2.1.27-1                     0.50 MiB
core/libseccomp               2.4.1-2                      0.68 MiB
core/libsecret                0.18.8-2                     1.85 MiB
core/libssh2                  1.8.2-1                      0.39 MiB
core/libtasn1                 4.14-1                       0.31 MiB
core/libtirpc                 1.1.4-1                      0.50 MiB
core/libunistring             0.9.10-1                     2.25 MiB
core/libusb                   1.0.22-1                     0.17 MiB
core/libutil-linux            2.34-3                       1.40 MiB
extra/libxml2                 2.9.9-2                      9.20 MiB
core/linux-api-headers        5.1-1                        4.33 MiB
core/lz4                      1:1.9.1-1                    0.38 MiB
core/mkinitcpio               25-2                         0.21 MiB
core/mkinitcpio-busybox       1.30.1-1                     0.50 MiB
core/mpfr                     4.0.2-1                      0.74 MiB
core/ncurses                  6.1-6                        3.58 MiB
core/nettle                   3.5.1-1                      0.84 MiB
core/npth                     1.6-1                        0.06 MiB
core/openresolv               3.9.1-1                      0.05 MiB
core/openssl                  1.1.1.c-1                    7.39 MiB
core/p11-kit                  0.23.16.1-1                  3.61 MiB
core/pacman-mirrorlist        20190821-1                   0.03 MiB
core/pam                      1.3.1-1                      2.61 MiB
core/pambase                  20190105.1-1                 0.01 MiB
core/pcre                     8.43-1                       3.42 MiB
core/pcre2                    10.33-1                      3.72 MiB
core/pinentry                 1.1.0-4                      0.48 MiB
core/popt                     1.16-10                      0.22 MiB
core/readline                 8.0.0-1                      0.69 MiB
core/sqlite                   3.29.0-1                     8.49 MiB
core/systemd                  242.84-2                    20.60 MiB
core/systemd-libs             242.84-2                     1.77 MiB
core/thin-provisioning-tools  0.8.5-2                      1.39 MiB
core/tzdata                   2019b-1                      2.84 MiB
core/xz                       5.2.4-1                      0.74 MiB
core/zlib                     1:1.2.11-3                   0.32 MiB
core/zstd                     1.4.2-1                      2.96 MiB
core/bash                     5.0.009-1                    8.03 MiB
core/bzip2                    1.0.8-2                      0.14 MiB
core/coreutils                8.31-1                      15.35 MiB
core/cryptsetup               2.2.0-1                      2.08 MiB
core/device-mapper            2.02.186-1                   0.81 MiB
core/dhcpcd                   7.2.2-1                      0.49 MiB
core/diffutils                3.7-1                        1.39 MiB
core/e2fsprogs                1.45.3-1                     4.77 MiB
core/file                     5.37-2                       5.55 MiB
core/filesystem               2019.05-2                    0.04 MiB
core/findutils                4.7.0-1                      1.58 MiB
core/gawk                     5.0.1-1                      2.77 MiB
core/gcc-libs                 9.1.0-2                    116.37 MiB
core/gettext                  0.20.1-1                     7.31 MiB
core/glibc                    2.29-4                      45.17 MiB
core/grep                     3.3-1                        0.66 MiB
core/gzip                     1.10-1                       0.15 MiB
core/inetutils                1.9.4-7                      1.12 MiB
core/iproute2                 5.2.0-1                      2.58 MiB
core/iputils                  20180629.f6aac8d-4           0.21 MiB
core/jfsutils                 1.1.15-6                     1.05 MiB
core/less                     551-1                        0.23 MiB
core/licenses                 20181104-1                   0.51 MiB
core/linux                    5.2.11.arch1-1              77.67 MiB
core/linux-firmware           20190815.07b925b-1         464.80 MiB
core/logrotate                3.15.0-1                     0.10 MiB
core/lvm2                     2.02.186-1                   6.61 MiB
core/man-db                   2.8.7-1                      2.80 MiB
core/man-pages                5.02-1                       5.75 MiB
core/mdadm                    4.1-1                        0.96 MiB
core/nano                     4.4-1                        2.47 MiB
core/netctl                   1.20-1                       0.09 MiB
core/pacman                   5.1.3-1                      4.60 MiB
core/pciutils                 3.6.2-1                      0.30 MiB
core/perl                     5.30.0-3                    56.49 MiB
core/procps-ng                3.3.15-1                     1.27 MiB
core/psmisc                   23.2-1                       0.50 MiB
core/reiserfsprogs            3.6.27-2                     0.62 MiB
core/s-nail                   14.9.15-1                    1.05 MiB
core/sed                      4.7-1                        0.70 MiB
core/shadow                   4.7-2                        4.35 MiB
core/sysfsutils               2.1.0-10                     0.12 MiB
core/syslinux                 6.04.pre2.r11.gbf6db5b4-1    4.30 MiB
core/systemd-sysvcompat       242.84-2                     0.00 MiB
core/tar                      1.32-1                       2.83 MiB
core/texinfo                  6.6-1                        8.50 MiB
core/usbutils                 012-1                        0.28 MiB
core/util-linux               2.34-3                      12.35 MiB
core/vi                       1:070224-3                   0.29 MiB
core/which                    2.21-3                       0.06 MiB
core/xfsprogs                 4.20.0-2                     5.10 MiB

Total Installed Size:  1094.18 MiB

:: Proceed with installation? [Y/n] 
(139/139) checking keys in keyring                     [----------------------------] 100%
(139/139) checking package integrity                   [----------------------------] 100%
(139/139) loading package files                        [----------------------------] 100%
(139/139) checking for file conflicts                  [----------------------------] 100%
:: Processing package changes...
(  1/139) installing linux-api-headers                 [----------------------------] 100%
(  2/139) installing tzdata                            [----------------------------] 100%
(  3/139) installing iana-etc                          [----------------------------] 100%
(  4/139) installing filesystem                        [----------------------------] 100%
(  5/139) installing glibc                             [----------------------------] 100%
Optional dependencies for glibc
    gd: for memusagestat
(  6/139) installing gcc-libs                          [----------------------------] 100%
(  7/139) installing ncurses                           [----------------------------] 100%
(  8/139) installing readline                          [----------------------------] 100%
(  9/139) installing bash                              [----------------------------] 100%
Optional dependencies for bash
    bash-completion: for tab completion
( 10/139) installing bzip2                             [----------------------------] 100%
( 11/139) installing attr                              [----------------------------] 100%
( 12/139) installing acl                               [----------------------------] 100%
( 13/139) installing gmp                               [----------------------------] 100%
( 14/139) installing libcap                            [----------------------------] 100%
( 15/139) installing gdbm                              [----------------------------] 100%
( 16/139) installing db                                [----------------------------] 100%
( 17/139) installing perl                              [----------------------------] 100%
( 18/139) installing openssl                           [----------------------------] 100%
Optional dependencies for openssl
    ca-certificates [pending]
( 19/139) installing coreutils                         [----------------------------] 100%
( 20/139) installing libgpg-error                      [----------------------------] 100%
( 21/139) installing libgcrypt                         [----------------------------] 100%
( 22/139) installing lz4                               [----------------------------] 100%
( 23/139) installing xz                                [----------------------------] 100%
( 24/139) installing systemd-libs                      [----------------------------] 100%
( 25/139) installing device-mapper                     [----------------------------] 100%
( 26/139) installing popt                              [----------------------------] 100%
( 27/139) installing libutil-linux                     [----------------------------] 100%
( 28/139) installing json-c                            [----------------------------] 100%
( 29/139) installing argon2                            [----------------------------] 100%
( 30/139) installing cryptsetup                        [----------------------------] 100%
( 31/139) installing expat                             [----------------------------] 100%
( 32/139) installing e2fsprogs                         [----------------------------] 100%
( 33/139) installing libsasl                           [----------------------------] 100%
( 34/139) installing libldap                           [----------------------------] 100%
( 35/139) installing keyutils                          [----------------------------] 100%
( 36/139) installing krb5                              [----------------------------] 100%
( 37/139) installing libcap-ng                         [----------------------------] 100%
( 38/139) installing audit                             [----------------------------] 100%
( 39/139) installing dbus                              [----------------------------] 100%
( 40/139) installing libmnl                            [----------------------------] 100%
( 41/139) installing libnftnl                          [----------------------------] 100%
( 42/139) installing libnl                             [----------------------------] 100%
( 43/139) installing libusb                            [----------------------------] 100%
( 44/139) installing libpcap                           [----------------------------] 100%
( 45/139) installing libnfnetlink                      [----------------------------] 100%
( 46/139) installing libnetfilter_conntrack            [----------------------------] 100%
( 47/139) installing iptables                          [----------------------------] 100%
( 48/139) installing zlib                              [----------------------------] 100%
( 49/139) installing cracklib                          [----------------------------] 100%
( 50/139) installing libtirpc                          [----------------------------] 100%
( 51/139) installing pambase                           [----------------------------] 100%
( 52/139) installing pam                               [----------------------------] 100%
( 53/139) installing kbd                               [----------------------------] 100%
( 54/139) installing kmod                              [----------------------------] 100%
( 55/139) installing hwids                             [----------------------------] 100%
( 56/139) installing libunistring                      [----------------------------] 100%
( 57/139) installing libidn2                           [----------------------------] 100%
( 58/139) installing libelf                            [----------------------------] 100%
( 59/139) installing libseccomp                        [----------------------------] 100%
( 60/139) installing shadow                            [----------------------------] 100%
( 61/139) installing util-linux                        [----------------------------] 100%
Optional dependencies for util-linux
    python: python bindings to libmount
    words: default dictionary for look
( 62/139) installing pcre2                             [----------------------------] 100%
( 63/139) installing systemd                           [----------------------------] 100%
Initializing machine ID from random generator.
Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service → /usr/lib/systemd/system/getty@.service.
Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /usr/lib/systemd/system/remote-fs.target.
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
   bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
    libmicrohttpd: remote journald capabilities
    quota-tools: kernel-level quota management
    systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
    polkit: allow administration as unprivileged user
    curl: machinectl pull-tar and pull-raw [pending]
( 64/139) installing dhcpcd                            [----------------------------] 100%
Optional dependencies for dhcpcd
    openresolv: resolvconf support [pending]
( 65/139) installing diffutils                         [----------------------------] 100%
( 66/139) installing file                              [----------------------------] 100%
( 67/139) installing findutils                         [----------------------------] 100%
( 68/139) installing mpfr                              [----------------------------] 100%
( 69/139) installing gawk                              [----------------------------] 100%
( 70/139) installing pcre                              [----------------------------] 100%
( 71/139) installing libffi                            [----------------------------] 100%
( 72/139) installing glib2                             [----------------------------] 100%
Optional dependencies for glib2
    python: gdbus-codegen, glib-genmarshal, glib-mkenums, gtester-report
    libelf: gresource inspection tool [installed]
( 73/139) installing icu                               [----------------------------] 100%
( 74/139) installing libxml2                           [----------------------------] 100%
( 75/139) installing libcroco                          [----------------------------] 100%
( 76/139) installing gettext                           [----------------------------] 100%
Optional dependencies for gettext
    git: for autopoint infrastructure updates
( 77/139) installing grep                              [----------------------------] 100%
( 78/139) installing less                              [----------------------------] 100%
( 79/139) installing gzip                              [----------------------------] 100%
( 80/139) installing inetutils                         [----------------------------] 100%
( 81/139) installing iproute2                          [----------------------------] 100%
Optional dependencies for iproute2
    linux-atm: ATM support
( 82/139) installing iputils                           [----------------------------] 100%
Optional dependencies for iputils
    xinetd: for tftpd
( 83/139) installing jfsutils                          [----------------------------] 100%
( 84/139) installing licenses                          [----------------------------] 100%
( 85/139) installing linux-firmware                    [----------------------------] 100%
( 86/139) installing mkinitcpio-busybox                [----------------------------] 100%
( 87/139) installing zstd                              [----------------------------] 100%
( 88/139) installing libarchive                        [----------------------------] 100%
( 89/139) installing mkinitcpio                        [----------------------------] 100%
Optional dependencies for mkinitcpio
    xz: Use lzma or xz compression for the initramfs image [installed]
    bzip2: Use bzip2 compression for the initramfs image [installed]
    lzop: Use lzo compression for the initramfs image
    lz4: Use lz4 compression for the initramfs image [installed]
    mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 90/139) installing linux                             [----------------------------] 100%
Optional dependencies for linux
    crda: to set the correct wireless channels of your country
( 91/139) installing logrotate                         [----------------------------] 100%
( 92/139) installing libaio                            [----------------------------] 100%
( 93/139) installing thin-provisioning-tools           [----------------------------] 100%
( 94/139) installing lvm2                              [----------------------------] 100%
( 95/139) installing groff                             [----------------------------] 100%
Optional dependencies for groff
    netpbm: for use together with man -H command interaction in browsers
    psutils: for use together with man -H command interaction in browsers
    libxaw: for gxditview
( 96/139) installing libpipeline                       [----------------------------] 100%
( 97/139) installing man-db                            [----------------------------] 100%
Optional dependencies for man-db
    gzip [installed]
( 98/139) installing man-pages                         [----------------------------] 100%
( 99/139) installing mdadm                             [----------------------------] 100%
(100/139) installing nano                              [----------------------------] 100%
(101/139) installing openresolv                        [----------------------------] 100%
(102/139) installing netctl                            [----------------------------] 100%
Optional dependencies for netctl
    dialog: for the menu based wifi assistant
    dhclient: for DHCP support (or dhcpcd)
    dhcpcd: for DHCP support (or dhclient) [installed]
    wpa_supplicant: for wireless networking support
    ifplugd: for automatic wired connections through netctl-ifplugd
    ppp: for PPP connections
    openvswitch: for Open vSwitch connections
(103/139) installing libtasn1                          [----------------------------] 100%
(104/139) installing p11-kit                           [----------------------------] 100%
Created symlink /etc/systemd/user/sockets.target.wants/p11-kit-server.socket → /usr/lib/systemd/user/p11-kit-server.socket.
(105/139) installing ca-certificates-utils             [----------------------------] 100%
(106/139) installing ca-certificates-mozilla           [----------------------------] 100%
(107/139) installing ca-certificates                   [----------------------------] 100%
(108/139) installing libssh2                           [----------------------------] 100%
(109/139) installing libpsl                            [----------------------------] 100%
(110/139) installing libnghttp2                        [----------------------------] 100%
(111/139) installing curl                              [----------------------------] 100%
(112/139) installing npth                              [----------------------------] 100%
(113/139) installing libksba                           [----------------------------] 100%
(114/139) installing libassuan                         [----------------------------] 100%
(115/139) installing libsecret                         [----------------------------] 100%
Optional dependencies for libsecret
    gnome-keyring: key storage service, or use any other service implementing
    org.freedesktop.secrets
(116/139) installing pinentry                          [----------------------------] 100%
Optional dependencies for pinentry
    gtk2: gtk2 backend
    qt5-base: qt backend
    gcr: gnome3 backend
(117/139) installing nettle                            [----------------------------] 100%
(118/139) installing gnutls                            [----------------------------] 100%
Optional dependencies for gnutls
    guile: for use with Guile bindings
(119/139) installing sqlite                            [----------------------------] 100%
(120/139) installing gnupg                             [----------------------------] 100%
Optional dependencies for gnupg
    libldap: gpg2keys_ldap [installed]
    libusb-compat: scdaemon
    pcsclite: scdaemon
(121/139) installing gpgme                             [----------------------------] 100%
(122/139) installing pacman-mirrorlist                 [----------------------------] 100%
(123/139) installing archlinux-keyring                 [----------------------------] 100%
(124/139) installing pacman                            [----------------------------] 100%
Optional dependencies for pacman
    perl-locale-gettext: translation support in makepkg-template
    xdelta3: delta support in repo-add
(125/139) installing pciutils                          [----------------------------] 100%
(126/139) installing procps-ng                         [----------------------------] 100%
(127/139) installing psmisc                            [----------------------------] 100%
(128/139) installing reiserfsprogs                     [----------------------------] 100%
(129/139) installing s-nail                            [----------------------------] 100%
Optional dependencies for s-nail
    smtp-forwarder: for sending mail
(130/139) installing sed                               [----------------------------] 100%
(131/139) installing sysfsutils                        [----------------------------] 100%
(132/139) installing systemd-sysvcompat                [----------------------------] 100%
(133/139) installing tar                               [----------------------------] 100%
(134/139) installing texinfo                           [----------------------------] 100%
(135/139) installing usbutils                          [----------------------------] 100%
Optional dependencies for usbutils
    python: for lsusb.py usage
    coreutils: for lsusb.py usage [installed]
(136/139) installing vi                                [----------------------------] 100%
Optional dependencies for vi
    s-nail: used by the preserve command for notification [installed]
(137/139) installing which                             [----------------------------] 100%
(138/139) installing xfsprogs                          [----------------------------] 100%
(139/139) installing syslinux                          [----------------------------] 100%

==> For setting up Syslinux BIOS using the syslinux-install_update script follow
    https://wiki.archlinux.org/index.php/Syslinux#Automatic_Install
Optional dependencies for syslinux
    perl-crypt-passwdmd5: For md5pass
    perl-digest-sha1: For sha1pass
    mtools: For mkdiskimage and syslinux support
    gptfdisk: For GPT support
    util-linux: For isohybrid [installed]
    efibootmgr: For EFI support
    dosfstools: For EFI support
:: Running post-transaction hooks...
( 1/14) Creating system user accounts...
( 2/14) Updating linux module dependencies...
( 3/14) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 5.2.11-arch1-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
bsdcpio: Failed to set default locale
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 5.2.11-arch1-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
bsdcpio: Failed to set default locale
==> Image generation successful
( 4/14) Reloading system bus configuration...
Running in chroot, ignoring request: try-reload-or-restart
( 5/14) Warn about old perl modules
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
	LANGUAGE = (unset),
	LC_ALL = (unset),
	LC_ADDRESS = "en_IN",
	LC_NAME = "en_IN",
	LC_MONETARY = "en_IN",
	LC_PAPER = "en_IN",
	LC_IDENTIFICATION = "en_IN",
	LC_TELEPHONE = "en_IN",
	LC_MEASUREMENT = "en_IN",
	LC_TIME = "en_IN",
	LC_NUMERIC = "en_IN",
	LANG = "C"
    are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
( 6/14) Updating journal message catalog...
( 7/14) Reloading system manager configuration...
Running in chroot, ignoring request: daemon-reload
( 8/14) Updating udev hardware database...
( 9/14) Applying kernel sysctl settings...
(10/14) Creating temporary files...
error: command failed to execute correctly
(11/14) Reloading device manager configuration...
Running in chroot, ignoring request.
(12/14) Arming ConditionNeedsUpdate...
(13/14) Updating the info directory file...
(14/14) Rebuilding certificate stores...
[mkarchiso] INFO: Packages installed successfully!

[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO:                   Command:   install
[mkarchiso] INFO:              Architecture:   x86_64
[mkarchiso] INFO:         Working directory:   work/x86_64
[mkarchiso] INFO:    Installation directory:   arch
[mkarchiso] INFO:        Pacman config file:   work/pacman.conf
[mkarchiso] INFO:                  Packages:   haveged intel-ucode amd-ucode memtest86+ mkinitcpio-nfs-utils nbd zsh efitools

[mkarchiso] INFO: Installing packages to 'work/x86_64/airootfs/'...
==> Creating install root at work/x86_64/airootfs
==> Installing packages to work/x86_64/airootfs
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
 multilib is up to date
 arcolinux_repo is up to date
 arcolinux_repo_3party is up to date
 arcolinux_repo_submicron is up to date
 arcolinux_repo_iso is up to date
resolving dependencies...
looking for conflicting packages...

Package (8)                New Version         Net Change

core/amd-ucode             20190815.07b925b-1    0.06 MiB
extra/efitools             1.9.2-1               1.50 MiB
extra/haveged              1.9.4-3               0.15 MiB
extra/intel-ucode          20190618-1            2.46 MiB
extra/memtest86+           5.01-3                0.15 MiB
core/mkinitcpio-nfs-utils  0.3-6                 0.05 MiB
community/nbd              3.19-1                0.25 MiB
extra/zsh                  5.7.1-1               6.10 MiB

Total Installed Size:  10.71 MiB

:: Proceed with installation? [Y/n] 
(8/8) checking keys in keyring                         [----------------------------] 100%
(8/8) checking package integrity                       [----------------------------] 100%
(8/8) loading package files                            [----------------------------] 100%
(8/8) checking for file conflicts                      [----------------------------] 100%
:: Processing package changes...
(1/8) installing haveged                               [----------------------------] 100%
(2/8) installing intel-ucode                           [----------------------------] 100%
(3/8) installing amd-ucode                             [----------------------------] 100%
(4/8) installing memtest86+                            [----------------------------] 100%
(5/8) installing mkinitcpio-nfs-utils                  [----------------------------] 100%
(6/8) installing nbd                                   [----------------------------] 100%
(7/8) installing zsh                                   [----------------------------] 100%
(8/8) installing efitools                              [----------------------------] 100%
:: Running post-transaction hooks...
(1/4) Creating system user accounts...
(2/4) Updating linux initcpios...
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 5.2.11-arch1-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [autodetect]
==> ERROR: failed to detect root filesystem
  -> Running build hook: [modconf]
  -> Running build hook: [block]
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
bsdcpio: Failed to set default locale
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
  -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 5.2.11-arch1-1-ARCH
  -> Running build hook: [base]
  -> Running build hook: [udev]
  -> Running build hook: [modconf]
  -> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: wd719x
==> WARNING: Possibly missing firmware for module: aic94xx
  -> Running build hook: [filesystems]
  -> Running build hook: [keyboard]
  -> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
bsdcpio: Failed to set default locale
==> Image generation successful
(3/4) Reloading system manager configuration...
Running in chroot, ignoring request: daemon-reload
(4/4) Arming ConditionNeedsUpdate...
[mkarchiso] INFO: Packages installed successfully!
###################################################################
3. Additional packages (airootfs)
###################################################################

[mkarchiso] INFO: Configuration settings
[mkarchiso] INFO:                   Command:   install
[mkarchiso] INFO:              Architecture:   x86_64
[mkarchiso] INFO:         Working directory:   work/x86_64
[mkarchiso] INFO:    Installation directory:   arch
[mkarchiso] INFO:        Pacman config file:   work/pacman.conf
[mkarchiso] INFO:                  Packages:   arch-install-scripts broadcom-wl btrfs-progs clonezilla crda darkhttpd ddrescue dhclient dialog dmraid dnsmasq dnsutils dosfstools ethtool exfat-utils f2fs-tools fsarchiver gnu-netcat gpm gptfdisk grub hdparm ipw2100-fw ipw2200-fw irssi linux-atm lsscsi mc mtools ndisc6 nfs-utils nilfs-utils ntfs-3g ntp openconnect openssh openvpn partclone parted partimage ppp pptpclient refind-efi rp-pppoe rsync sdparm sg3_utils smartmontools sudo tcpdump testdisk usb_modeswitch vim-minimal vpnc wget wireless_tools wvdial xl2tpd xorg-server xorg-apps xorg-xinit xterm xf86-input-elographics xf86-input-evdev xf86-input-keyboard xf86-input-libinput xf86-input-mouse xf86-input-vmmouse xf86-input-void xf86-video-amdgpu xf86-video-ati xf86-video-fbdev xf86-video-intel xf86-video-nouveau xf86-video-openchrome xf86-video-vesa xf86-video-vmware mesa base-devel virtualbox-guest-modules-arch virtualbox-guest-utils os-prober cryptsetup alsa-firmware alsa-plugins alsa-lib alsa-utils gst-libav gst-plugins-bad gst-plugins-base gst-plugins-good gst-plugins-ugly gstreamer libdvdcss pulseaudio pulseaudio-alsa pavucontrol blueberry bluez bluez-libs bluez-utils pulseaudio-bluetooth avahi nss-mdns mobile-broadband-provider-info modemmanager networkmanager network-manager-applet networkmanager-openconnect networkmanager-openvpn networkmanager-pptp networkmanager-vpnc networkmanager-dispatcher-ntpd openresolv wpa_supplicant gvfs gvfs-afc gvfs-gphoto2 gvfs-mtp gvfs-nfs gvfs-smb mtpfs thunar thunar-archive-plugin thunar-media-tags-plugin thunar-volman udiskie udisks2 xdg-user-dirs cups cups-filters cups-pdf cups-pk-helper ghostscript gsfonts gtk3-print-backends gutenprint libcups splix system-config-printer tumbler ffmpegthumbnailer freetype2 libgsf libopenraw poppler-glib poppler-qt5 feh imagemagick meld numlockx scrot termite adobe-source-sans-pro-fonts awesome-terminal-fonts noto-fonts ttf-dejavu ttf-droid ttf-roboto accountsservice lightdm gtk-engine-murrine arc-gtk-theme kvantum-qt5 kvantum-theme-arc arandr bash-completion dconf-editor expac file-roller git gksu gnome-disk-utility gnome-keyring gparted hardinfo htop intltool iw jsoncpp libmtp laptop-detect lsb-release mlocate p7zip plank polkit polkit-gnome python2-dbus python2-xdg qt5ct qt5-styleplugins qt5-webkit reflector rofi timeshift tree unace unrar unzip w3m webkit2gtk wmctrl xapps xdg-desktop-portal-gtk zenity xcursor-breeze numix-circle-arc-icons-git numix-icon-theme-git numix-circle-icon-theme-git sardi-icons surfn-icons-git mkinitcpio-openswap conky-lua-archers downgrade grub-customizer hardcode-fixer-git inxi menulibre mintstick-git mugshot neofetch pamac-aur sublime-text-dev the_platinum_searcher-bin trizen yad yay-bin arcolinux-applications-git arcolinux-arc-themes-nico-git arcolinux-bin-git arcolinux-config-deepin-git arcolinux-config-git arcolinux-config-gnome-git arcolinux-conky-collection-git arcolinux-faces-git arcolinux-fonts-git arcolinux-geany-git arcolinux-grub-theme-vimix-git arcolinux-keyring arcolinux-kvantum-git arcolinux-lightdm-gtk-greeter arcolinux-lightdm-gtk-greeter-settings arcolinux-local-git arcolinux-mirrorlist-git arcolinux-neofetch-git arcolinux-pipemenus-git arcolinux-plank-git arcolinux-plank-themes-git arcolinux-qt5-git arcolinux-rofi-git arcolinux-rofi-themes-git arcolinux-root-git arcolinux-slim arcolinux-slimlock-themes-git arcolinux-system-config-git arcolinux-termite-themes-git arcolinux-variety-git arcolinux-wallpapers-git arcolinux-xfce4-panel-profiles-git arcolinux-xfce-thunar-git exo garcon thunar xfce4-appfinder xfce4-panel xfce4-power-manager xfce4-session xfce4-settings xfce4-terminal xfconf xfdesktop gala-git ristretto xfce4-battery-plugin xfce4-cpufreq-plugin xfce4-cpugraph-plugin xfce4-datetime-plugin xfce4-dict xfce4-diskperf-plugin xfce4-eyes-plugin xfce4-fsguard-plugin xfce4-genmon-plugin xfce4-mailwatch-plugin xfce4-mount-plugin xfce4-mpc-plugin xfce4-netload-plugin xfce4-notes-plugin xfce4-notifyd xfce4-pulseaudio-plugin xfce4-screenshooter xfce4-sensors-plugin xfce4-smartbookmark-plugin xfce4-systemload-plugin xfce4-taskmanager xfce4-time-out-plugin xfce4-timer-plugin xfce4-verve-plugin xfce4-wavelan-plugin xfce4-weather-plugin xfce4-whiskermenu-plugin xfce4-xkb-plugin xfce4-panel-profiles calamares arcolinux-system-installation-git arcolinuxb-calamares-xfce-git ckbcomp upower kcoreaddons kconfig ki18n kservice kwidgetsaddons kpmcore boost-libs libpwquality squashfs-tools plasma-framework hwinfo qt5-xmlpatterns

[mkarchiso] INFO: Installing packages to 'work/x86_64/airootfs/'...
==> Creating install root at work/x86_64/airootfs
==> Installing packages to work/x86_64/airootfs
:: Synchronizing package databases...
 core is up to date
 extra is up to date
 community is up to date
 multilib is up to date
 arcolinux_repo is up to date
 arcolinux_repo_3party is up to date
 arcolinux_repo_submicron is up to date
 arcolinux_repo_iso is up to date
:: There are 36 members in group xorg-apps:
:: Repository extra
   1) xorg-bdftopcf  2) xorg-iceauth  3) xorg-luit  4) xorg-mkfontscale  5) xorg-sessreg
   6) xorg-setxkbmap  7) xorg-smproxy  8) xorg-x11perf  9) xorg-xauth
   10) xorg-xbacklight  11) xorg-xcmsdb  12) xorg-xcursorgen  13) xorg-xdpyinfo
   14) xorg-xdriinfo  15) xorg-xev  16) xorg-xgamma  17) xorg-xhost  18) xorg-xinput
   19) xorg-xkbcomp  20) xorg-xkbevd  21) xorg-xkbutils  22) xorg-xkill
   23) xorg-xlsatoms  24) xorg-xlsclients  25) xorg-xmodmap  26) xorg-xpr  27) xorg-xprop
   28) xorg-xrandr  29) xorg-xrdb  30) xorg-xrefresh  31) xorg-xset  32) xorg-xsetroot
   33) xorg-xvinfo  34) xorg-xwd  35) xorg-xwininfo  36) xorg-xwud

Enter a selection (default=all): 
:: There are 26 members in group base-devel:
:: Repository core
   1) autoconf  2) automake  3) binutils  4) bison  5) fakeroot  6) file  7) findutils
   8) flex  9) gawk  10) gcc  11) gettext  12) grep  13) groff  14) gzip  15) libtool
   16) m4  17) make  18) pacman  19) patch  20) pkgconf  21) sed  22) sudo  23) systemd
   24) texinfo  25) util-linux  26) which

Enter a selection (default=all): 
warning: file-5.37-2 is up to date -- reinstalling
warning: findutils-4.7.0-1 is up to date -- reinstalling
warning: gawk-5.0.1-1 is up to date -- reinstalling
warning: gettext-0.20.1-1 is up to date -- reinstalling
warning: grep-3.3-1 is up to date -- reinstalling
warning: groff-1.22.4-1 is up to date -- reinstalling
warning: gzip-1.10-1 is up to date -- reinstalling
warning: pacman-5.1.3-1 is up to date -- reinstalling
warning: sed-4.7-1 is up to date -- reinstalling
warning: skipping target: sudo
warning: systemd-242.84-2 is up to date -- reinstalling
warning: texinfo-6.6-1 is up to date -- reinstalling
warning: util-linux-2.34-3 is up to date -- reinstalling
warning: which-2.21-3 is up to date -- reinstalling
warning: cryptsetup-2.2.0-1 is up to date -- reinstalling
warning: openresolv-3.9.1-1 is up to date -- reinstalling
warning: skipping target: thunar
error: target not found: gala-git
==> ERROR: Failed to install packages to new root

################################################################## 
Phase 8 : Moving the iso to out folder
################################################################## 

cp: cannot stat '/home/x/arcolinuxb-build/archiso/out/arcolinuxb*': No such file or directory

################################################################## 
Phase 9 : Making sure we start with a clean slate next time
################################################################## 

Deleting the build folder if one exists - takes some time

User avatar
erikdubois
Captain
Posts: 2345
Joined: Tue Nov 07, 2017 3:45 pm
Location: Belgium
Contact:
Belgium
Re: [OPEN] Iso is not built and thus not copied

Post by erikdubois » Sat Sep 07, 2019 8:35 am

error: failed to init transaction (unable to lock database)
error: could not lock database: File exists
if you're sure a package manager is not already
running, you can remove /var/lib/pacman/db.lck
You were updating in an other terminal or via pamac-aur.

Just do one thing at the time.

If not updating, remove lock with the alias

Code: Select all

unlock
or just reboot and try again.

After updating ALWAYS reboot and then build the iso.
Learn, have fun and enjoy.
But first use the power of the Arch Wiki
use the tutorials on https://www.youtube.com/erikdubois
then use the power of google
then use the power of our moderators.


Post Reply

Return to “BYOI ArcoLinuxB Xfce”